Most of those who never considered fixing their own cars are the ones who are afraid to try because of multiple fearsome possibilities. For some reason, they just wanted to spend a couple of bucks to let other people do the job. Well in fact, you could save more from being knowledgeable of the anatomy of your car. There is nothing wrong with getting your hands dirty with grease and paint.
Some say because of safety purposes that's why they don't want to try exploring the farther side of things. Would this perception help you in the long run? Maybe not. If you're thinking about safety, try being caught up in the mountainside while the rain is pouring hard and you're tires are flat. But you can't do anything about it because you know nothing about jobs like these. So you're stuck and wait for the next possible vehicle to arrive or wait till kingdom come. Talk about being safe.
You can't always expect for all these technologies to help you. Sometimes these things are absent when you need them most. Alright, if you're convinced, here are the things that would help you understand that safety is not only in the hands of the car but the owner as well.
Fact is, you alone, are responsible for whatever the outcome may be. And you, above all else should know how your car would react in some predicaments. If you are just a beginner when it comes to handling cars, better consult someone who knows, someone who wouldn't charge you for a simple question.
When it comes to doing it alone, always remember that your car is a large container of flammable liquid. It would explode if it has encountered flame or a slight spark. So be cautious NOT to burn your car down or your house. Be responsible enough to know that.
If only you know how to keep your tools away from the reach of little kids, then everyone will be happy. You wouldn't want to hear your car cry because a bolt is missing.
Safety kits are there just in case. But that doesn't necessarily mean that you would abuse the use of it.
Organize yourself. Never lose your concentration on what you're doing. Always stay focused and remember the tools you used. As much as possible, do not take everything out of the box. Just those that you need are fine. Then put them back where they belong.
See, if you could only gather up that composure and earn yourself a bit of self responsibility, everything would turn out nice and smooth.
2012/04/03
Changing Your Brake Pads In A Jiffy
A few reminders for beginners with this crucial part of the instructions. First, never be irresponsible to not gather the needed materials and equipments when handling this task. Next, never compromise your safety by being lazy. Since you are working underneath the car, be sure that your jack is in place with stands supporting it. You wouldn't want to see yourself calling for help because your car just fell on you.
Now that's emphasized, lets get to work.
The things that you will need with this chore are wrenches (depending on the class of your car, it might be Allen, open end, lug, etc.), hammer, cord, and a c-clamp.
Take off the wheel first. It would be easier to unscrew the bolts while its still on the ground. Then use the jack to lift it up provided with some support. Remember that the wheel will only pop out once you have lifted the car a few inches above the ground and when all bolts and nuts are out of the way.
Next thing that you should do is to unbolt your cars caliper. The moment you remove it, you would instantly see the brake calipers just above the bolts. Remove the bolts located at the back of the caliper and set them in a place where you can easily locate them once switching is done. Waggle the caliper while holding it to break it loose then pull it gently upward for it to loosen just a bit. Let your caliper hang on the cord and not on the brake line.
Take a good picture of how everything looks like when it is installed before removing the old pads. If your pads don't loosen that easily, you could use your hammer and tap it a bit then try pulling it again. The moment it breaks free, you can put on its replacement by sliding them in their proper place. You have to make sure that all clips are set in their places, not forgetting a thing because if you did forget something, you have to pull out the entire set again.
You can now compress the piston of the brake by taking the c-clamp and using it to tighten the screw of the piston until it has moved as far enough as possible to let the caliper plop. Slide the caliper through the new pads. Attach the bolts in their respective holders. To test this, press on the brake pedal for a couple of times to ensure how solid your brakes are. That's it, just put back your wheels and you're all done.
What you do once you spotted the bulb holder is unplug the wirings attached to it. This plug is held by a clip made of metal, cap, or a plastic catch. If you have a metal clip, just pull it away. If you have a cap, use a screw driver to unscrew it. Last, if you have encountered a plastic catch, press the lever.
You can now remove the headlight out from its base by means of pulling it gently or rotating it. If you have greased your hands, clean yourself up first. Then use a piece of cloth to put the new bulb into the holder and tighten it. After making sure that the bulbs in its correct place, test your new lights by starting your car.
Now that's emphasized, lets get to work.
The things that you will need with this chore are wrenches (depending on the class of your car, it might be Allen, open end, lug, etc.), hammer, cord, and a c-clamp.
Take off the wheel first. It would be easier to unscrew the bolts while its still on the ground. Then use the jack to lift it up provided with some support. Remember that the wheel will only pop out once you have lifted the car a few inches above the ground and when all bolts and nuts are out of the way.
Next thing that you should do is to unbolt your cars caliper. The moment you remove it, you would instantly see the brake calipers just above the bolts. Remove the bolts located at the back of the caliper and set them in a place where you can easily locate them once switching is done. Waggle the caliper while holding it to break it loose then pull it gently upward for it to loosen just a bit. Let your caliper hang on the cord and not on the brake line.
Take a good picture of how everything looks like when it is installed before removing the old pads. If your pads don't loosen that easily, you could use your hammer and tap it a bit then try pulling it again. The moment it breaks free, you can put on its replacement by sliding them in their proper place. You have to make sure that all clips are set in their places, not forgetting a thing because if you did forget something, you have to pull out the entire set again.
You can now compress the piston of the brake by taking the c-clamp and using it to tighten the screw of the piston until it has moved as far enough as possible to let the caliper plop. Slide the caliper through the new pads. Attach the bolts in their respective holders. To test this, press on the brake pedal for a couple of times to ensure how solid your brakes are. That's it, just put back your wheels and you're all done.
What you do once you spotted the bulb holder is unplug the wirings attached to it. This plug is held by a clip made of metal, cap, or a plastic catch. If you have a metal clip, just pull it away. If you have a cap, use a screw driver to unscrew it. Last, if you have encountered a plastic catch, press the lever.
You can now remove the headlight out from its base by means of pulling it gently or rotating it. If you have greased your hands, clean yourself up first. Then use a piece of cloth to put the new bulb into the holder and tighten it. After making sure that the bulbs in its correct place, test your new lights by starting your car.
Replacing The Headlight
A drivers primary responsibility is to look after his car and see to it that everything is working as planned. Now if you miss a particular spot like your light bulb, that would give you a big problem, especially if the lights that are missing are the ones overlooking the drivers view. Yes, the headlights.
There are two types of headlights, the dim ones that are used for closer contacts and the bright ones that are usually used on freeways and super highways especially during the night. If one of these is not working, you might compromise your safety.
Plus, busted headlights can get you into lot of trouble especially with the law. Replacing your ruined headlight can cost you less than receiving a $35 dollar ticket from these hotshots.
You can just go to the car repair shop and have it done there but no, you wouldn't do that because you are too proud and knowledgeable to have someone else repair it for you. Maybe, you could just drop by a car merchandise store and buy yourself a couple of light bulbs. Be sure that your new bulbs will fit the socket or else you have to go back and change it with something that suits it.
Once you have gathered together all your materials (technically, all you need to have are the light bulbs that you just bought), safely prop the hood open and look behind the headlight, locating the socket where you should put the bulb. To give you a better idea of what it looks like, its an indented box with three wires connected to it.
What you do once you spotted the bulb holder is unplug the wirings attached to it. This plug is held by a clip made of metal, cap, or a plastic catch. If you have a metal clip, just pull it away. If you have a cap, use a screw driver to unscrew it. Last, if you have encountered a plastic catch, press the lever.
You can now remove the headlight out from its base by means of pulling it gently or rotating it. If you have greased your hands, clean yourself up first. Then use a piece of cloth to put the new bulb into the holder and tighten it. After making sure that the bulbs in its correct place, test your new lights by starting your car. Voila!
There are two types of headlights, the dim ones that are used for closer contacts and the bright ones that are usually used on freeways and super highways especially during the night. If one of these is not working, you might compromise your safety.
Plus, busted headlights can get you into lot of trouble especially with the law. Replacing your ruined headlight can cost you less than receiving a $35 dollar ticket from these hotshots.
You can just go to the car repair shop and have it done there but no, you wouldn't do that because you are too proud and knowledgeable to have someone else repair it for you. Maybe, you could just drop by a car merchandise store and buy yourself a couple of light bulbs. Be sure that your new bulbs will fit the socket or else you have to go back and change it with something that suits it.
Once you have gathered together all your materials (technically, all you need to have are the light bulbs that you just bought), safely prop the hood open and look behind the headlight, locating the socket where you should put the bulb. To give you a better idea of what it looks like, its an indented box with three wires connected to it.
What you do once you spotted the bulb holder is unplug the wirings attached to it. This plug is held by a clip made of metal, cap, or a plastic catch. If you have a metal clip, just pull it away. If you have a cap, use a screw driver to unscrew it. Last, if you have encountered a plastic catch, press the lever.
You can now remove the headlight out from its base by means of pulling it gently or rotating it. If you have greased your hands, clean yourself up first. Then use a piece of cloth to put the new bulb into the holder and tighten it. After making sure that the bulbs in its correct place, test your new lights by starting your car. Voila!
Installing A Car Stereo
If you are the kind of radio junkie who loves pumping the bass and clearing out the streets with hip hop grooves, you might want to get your car a new stereo that can go from upbeats to classy and a bit of reggae music. Whatever your choice of music is, get it all styled up with a multifunctional stereo.
Indeed, it is fulfilling for car owners to change the entire working condition of his car. But changing your old stereo with a new one is more rewarding than any other tough jobs. It is like the cream of the crop.
Here, you'll be needing your newly bought car stereo, wiring kits for adapters, wire crimping tools, tape, cutters, screwdriver/s. The features of your new stereo will depend on your choice, personality, or the whole environment of your car.
Use a wiring kit to save you an hour from your installing time, minus the frustrations.
You have to first remove the trim panels then remove the trim around the stereo. Some cars have a lot of panels to get to the stereo itself. These panels are always attached by screws. Some as visible and others need proper focus to see it. Either way, you have to carefully remove these and put them in some place where you can easily find it. Do not lose something as important as these.
We go to the portion where you remove the stereo from its nesting point. With everything out, all you need to do is carefully detach your old stereo. Again, this would be held by numerous screws so get your screwdrivers ready. After successfully getting it out, don't just plug the new one in. There are still tasks you have to accomplish like connecting the wires altogether with the harness.
Alright, now here's the hard part. For you to connect the adapter, you have to crimp its connections by stripping the wires. Do not try installing a stereo with only electrical tape to connect it, like twisting it together. Refer to the manual provided with the stereo. Now that you have it done, you can plug the adapter into the harness and do a test run. If all seems okay, you can now re-install all those panels that you just detached.
Finish your installation by securing your new stereo into the dashboard bracket. Arrange the electrical wirings back in its place. Then safely push your stereo back into the area. All done! Now you can enjoy a more convenient way of listening to your music.
Indeed, it is fulfilling for car owners to change the entire working condition of his car. But changing your old stereo with a new one is more rewarding than any other tough jobs. It is like the cream of the crop.
Here, you'll be needing your newly bought car stereo, wiring kits for adapters, wire crimping tools, tape, cutters, screwdriver/s. The features of your new stereo will depend on your choice, personality, or the whole environment of your car.
Use a wiring kit to save you an hour from your installing time, minus the frustrations.
You have to first remove the trim panels then remove the trim around the stereo. Some cars have a lot of panels to get to the stereo itself. These panels are always attached by screws. Some as visible and others need proper focus to see it. Either way, you have to carefully remove these and put them in some place where you can easily find it. Do not lose something as important as these.
We go to the portion where you remove the stereo from its nesting point. With everything out, all you need to do is carefully detach your old stereo. Again, this would be held by numerous screws so get your screwdrivers ready. After successfully getting it out, don't just plug the new one in. There are still tasks you have to accomplish like connecting the wires altogether with the harness.
Alright, now here's the hard part. For you to connect the adapter, you have to crimp its connections by stripping the wires. Do not try installing a stereo with only electrical tape to connect it, like twisting it together. Refer to the manual provided with the stereo. Now that you have it done, you can plug the adapter into the harness and do a test run. If all seems okay, you can now re-install all those panels that you just detached.
Finish your installation by securing your new stereo into the dashboard bracket. Arrange the electrical wirings back in its place. Then safely push your stereo back into the area. All done! Now you can enjoy a more convenient way of listening to your music.
Doing On Your Brake Line
If you find yourself caught up in the middle of nowhere trying to find extra help because your brake line just went down, and you know that driving continuously with that kind of stature can get you into bigger trouble. Joyfully, you know a bit of information on how to repair a broken line. Good thing your father taught you how. Another good thing is that you have a spare brake line on your counter.
Before anything else, you have to stop your car and wait until everything is cooled down. You wouldn't want to get burned. Next thing you should do is check what the problem is. Yes, it's the brake line. But other than that, you have to make sure that it's only the brake line that's causing all those problems. Once you are sure about it, get on with the job.
Inspect the brake line. Is it entirely broken? Leaking? Brittle? If these questions are all answered with a yes, then you have to change it as soon as possible. The things that you should have, hopefully, would be your new brake lines, wrenches (the open-ended ones), brake fluid, and some rags.
The moment you have assembled those things, start by putting the jack underneath your cars body and make sure your jack is also supported by stands. Elevate your vehicles body. Remove the part of the tire which is adjacent to the brake line.
Once the tire is removed, you can now take out the old brake line and replace it with a new one. To do this, disconnect the metal lines that are attached to it. You would need your wrench to get them apart. Loosen the connection then use your rag in cases of leaks.
Now the removal part is quite the same as the connection part. The only difference is that when you attach it, the merchandise will be new. Insert the new line carefully. Connect it using two open end wrenches. This will make you tighten the grip easily than doing it with your own bare hands. Make sure that it is tight enough not to break loose and is not too tight to cause a leak.
Before driving off, be sure to check and if possible replace the brake fluid that was spilled while you're doing your repairs. Fill them up and make it a point that you have successfully bled the brakes. Off you go!
Before anything else, you have to stop your car and wait until everything is cooled down. You wouldn't want to get burned. Next thing you should do is check what the problem is. Yes, it's the brake line. But other than that, you have to make sure that it's only the brake line that's causing all those problems. Once you are sure about it, get on with the job.
Inspect the brake line. Is it entirely broken? Leaking? Brittle? If these questions are all answered with a yes, then you have to change it as soon as possible. The things that you should have, hopefully, would be your new brake lines, wrenches (the open-ended ones), brake fluid, and some rags.
The moment you have assembled those things, start by putting the jack underneath your cars body and make sure your jack is also supported by stands. Elevate your vehicles body. Remove the part of the tire which is adjacent to the brake line.
Once the tire is removed, you can now take out the old brake line and replace it with a new one. To do this, disconnect the metal lines that are attached to it. You would need your wrench to get them apart. Loosen the connection then use your rag in cases of leaks.
Now the removal part is quite the same as the connection part. The only difference is that when you attach it, the merchandise will be new. Insert the new line carefully. Connect it using two open end wrenches. This will make you tighten the grip easily than doing it with your own bare hands. Make sure that it is tight enough not to break loose and is not too tight to cause a leak.
Before driving off, be sure to check and if possible replace the brake fluid that was spilled while you're doing your repairs. Fill them up and make it a point that you have successfully bled the brakes. Off you go!
Langganan:
Postingan (Atom)